Trolleys

CHD – CHV – CHZ – PRD – PRV trolleys for lifting loads from 63 to 1,000kg

CHD & CHDD Manual Trolley

These manual travel trolleys are designed to handle 250-2,000 kg loads.

LOREM IPSUM

CHD – CHV – CHZ – PRD – PRV trolleys for lifting loads from 63 to 1,000kg

The CHVX is an electric travel trolley with a variable travel speed option. It can lift loads from 63 to 3,200 kg.

The CHVX enables the hanging of any type of hoisting device
Variable travel movement speed of 5 to 20 m/min
The gap between the flanges is adjustable, enabling it to be adapted to all types of IPN, IPE, HEA, or HEB straight or curved profiles
Protection is IP66 in standard
Class F motor protection system
4 rubber stops
The trolley was delivered non-assembled
Low-voltage electrical cabinet

LOREM IPSUM

CHD – CHV – CHZ – PRD – PRV trolleys for lifting loads from 63 to 1,000kg

VERLINDE CHZ / CHZ EX manual travel trolleys are designed to carry loads from 1,000 to 10,000 kg.

Can be used with any type of overhead-hooked lifting device
Operated by directly pushing the load (CHZD models) or using a hand wheel and chain (CHZDD models)
Epoxy Painting (min. 50 µm)
Easily adjustable to fit beams
Steel rollers machined for smooth movement
The trolley body is made of high-resistance steel
Rollers are compatible with all sorts of I and H beams
Wheel ball bearings are moisture-tight and maintenance-free
Galvanized hand chain on CHZDD type
Loads up to 10 tons
Delivered with CE certificate

Greater load capacities are available on request
3 Type «Y» models with 3 lifting points or type “X” with 4 lifting points are also available on request
Lifting beams for a big bag
Special lifting beams
Galvanized lifting beams
Special lifting beams with pick-up fork for pallets

LOREM IPSUM

CHD – CHV – CHZ – PRD – PRV trolleys for lifting loads from 63 to 1,000kg

PRD hand-operated trolleys are designed to articulate sliding gird systems for loads from 250 to 2,000 kg.

The ideal solution for hand-operated articulated sliding girders with up to 8-metre spans. The PRD offers a low-cost solution for moving loads of 250 to 2,000 kg by pushing them along any monorail-type steel section.
The ideal partner for this articulated rolling beam is a hand-powered chain hoist.
A pair of trolleys fitted with four steel rollers (mounted on ball bearings).
4 anti-drop rollers (in compliance with legislation)
A coupling consisting of a strap piece in die-stamped steel and 2 articulations, one of which is mounted on a ball and socket joint.
The assembly bolt work.
Assembly documentation available with the equipment

LOREM IPSUM

CHD – CHV – CHZ – PRD – PRV trolleys for lifting loads from 63 to 1,000kg

PRV trolleys are made for electrically powered articulated sliding girders for 250 to 2,000 kg loads.

The ideal solution for electrically-powered articulated sliding girders with spans of up to 12 meters. The PRV offers a low-cost solution for powered shifting of 250 to 2.,00kg loads along any monorail-type steel section
An electrically powered chain hoist is the ideal equipment for this articulated travelling beam
The electrical equipment for a 380V to 460V/3ph/50Hz power supply
A pair of electric trolleys capable of running at variable speed (5 to 20 m/min), single speed (5 or 10 m/min), or two speeds (10/2.5 or 20/5 m/min), each equipped with 4 cast iron rollers (2 driving and 2 support rollers), mounted on ball bearings and adjustable, with gears cut and rims machined to run on all types of the raceway
Four anti-drop rollers (in compliance with legislation)
A coupling consisting of a strap piece in die-stamped steel and two articulations, one of which is mounted on a ball-and-socket joint
Two safety chains
The assembly bolts and fasteners
Documentation for assembly and installation